E/Z Prime 895TM
Water-soluble Extrusion Coating
Primer/Adhesive for Aluminum Foil |
Application Conditions
|
In general, application
conditions should correspond to the following:
|
|
* Room Temperature
|
50¡ãF and up
|
|
* Solution Temperature
|
35¡ãF to 160¡ãF
|
|
* Application Method
|
Direct Gravure, Flexo, Rod,
Roll, etc.
|
|
* Accepting Film
|
Corona treated recommended,
but not required
|
|
* Extrudate Condition
|
Should be oxidized while
coating
|
|
| Typical Properties
* Appearance----------------------------------------------------------
Milky white
* Solids---------------------------------------------
19.80%-20% or customer specified
* Density-----------------------------------------------------
0.991
* Viscosity---------------------------------------------------
70-90 cps
* Weight/Gallon----------------------------------------------
8.26 lbs.
* PH---------------------------------------------------------
9.0-10.5
* Shelf life----------------------------------------------------
9 months
* Stability----------------------------------- Mechanical--excellent
Freeze-thaw stable
|
Packaging Applications
The individual components of E/Z
Prime 895 have been approved for indirect food
contact under FDA regulation 21
CFR part 175.105 and also conforms to CFR part
176.170 for Adhesive Laminates and CFR 176.170
and 21 CFR
176.180 and 175.300 components in contact with
food.
|
|
Safety
|
| * Material Safety Data Sheet |
Material Safety Data Sheet
for E/Z Prime 895 is available
|
|
* Labeling
|
E/Z Prime 895 is not classified
as a hazardous substance under DOT or OSHA
|
| |
regulations or as a controlled
product under WHIMS (Canada regulations).
|
| |
It does not contain any
hazardous components at levels which have
implications
|
| |
for labeling.
|
|
|
E/Z Prime 890TM
Water-soluble Extrusion Coating
Primer/Adhesive for Aluminum Foil
|
Application Conditions
|
In general, application
conditions should correspond to the following:
|
|
* Room Temperature
|
50¡ãF and up
|
|
* Solution Temperature
|
35¡ãF to 160¡ãF
|
|
* Application Method
|
Direct Gravure, Flexo, Rod,
Roll, etc.
|
|
* Accepting Film
|
Corona treated recommended,
but not required
|
|
* Extrudate Condition
|
Should be oxidized while
coating
|
|
| Typical Properties
* Appearance----------------------------------------------------------
Milky white
* Solids---------------------------------------------
19.80%-20% or customer specified
* Density-----------------------------------------------------
1.0044
* Viscosity---------------------------------------------------
70-90 cps
* Weight/Gallon----------------------------------------------
8.37 lbs.
* PH---------------------------------------------------------
9.0-10.5
* Shelf life----------------------------------------------------
9 months
* Stability----------------------------------- Mechanical--excellent
Freeze-thaw stable
|
|
Packaging Applications
The individual components of E/Z Prime
890 have been approved for indirect food contact
under FDA regulation 21 CFR part 175.105 and also
conforms to CFR part 176.170 for Adhesive Laminates
and CFR 176.170 and 21 CFR 176.180 and 175.300 components
in contact with food.
|
|
Safety
|
|
* Material Safety Data
Sheet
|
Material Safety Data Sheet
for E/Z Prime 890 is available
|
|
* Labeling
|
E/Z Prime 890 is not classified
as a hazardous substance under DOT or OSHA
|
|
|
regulations or as a controlled
product under WHIMS (Canada regulations).
|
|
|
It does not contain any
hazardous components at levels which have
implications
|
|
|
for labeling.
|
|
|
E/Z Prime 952TM
Water-soluble Extrusion Primer and
Lamination Adhesive
|
Application Conditions
| In general, application conditions
should correspond to the following: |
|
* Room Temperature
|
50¡ãF and up
|
|
* Solution Temperature
|
35¡ãF to 160¡ãF
|
|
* Application Method
|
Direct Gravure or Flexo
with very fine line and up
|
|
* Accepting Film
|
Corona treated recommended
|
|
* Extrudate Condition
|
Should be oxidized while
coating
|
|
|
Typical Properties
* Appearance-------------------------------------------------
Cloudy, off-white solution
* Solids--------------------------------------------------------
5% or customer specified
* Density-----------------------------------------------------
1.007
* Viscosity---------------------------------------------------
5-15 cps
* Weight/Gallon----------------------------------------------
8.39 lbs.
* PH---------------------------------------------------------
10.8-11.5
|
|
Packaging Applications
The range of packaging applications
using E/Z Prime 952 as a primary laminate adhesive
is expanded by the fact that it can be used, under
USDA approval, for indirect food contact, and has
approval for other packaging controlled by FDA regulation
21 CFR part 175.105 which governs substances used
only as adhesive components in food packaging, 21
CFR part 176.170 governing substances used as a
component of paper and paperboard in contact with
aqueous or fatty foods.
|
|
Safety
|
|
* Material Safety Data
Sheet
|
Material Safety Data Sheet
for E/Z Prime 952 is available
|
|
* Labeling
|
E/Z Prime 952 is not classified
as a hazardous substance under DOT or OSHA
|
| |
regulations or as a controlled
product under WHIMS (Canada regulations).
|
| |
It does not contain any
hazardous components at levels which have
implications
|
| |
for labeling.
|
|
![](../images/line.jpg"){kind=small}
